This equipment is suitable for stacking lithium batteries of the positive and negative batteries Z row stacking film, paste and short circuit, such as automatic storage tray and so on.
Equipment operation flow:Artificial positive and negative pole to the positive and negative on the material tray, install the diaphragm to the stack stage, press the touch screen to start automatic operation. The diaphragm is pressed against the stacking table, and the stack is stacked on the stack of laminations. The stack is moved by a station (the diaphragm is in the middle of the two stations) and then stacked to the stack of laminations. To the needs of the number of pole pieces, after the completion of the lamination by the robot clip out the diaphragm, the capsule is cut off after the diaphragm, the robot folder out of the paste, paste the glue after the end of the automatic discharge to the test mechanism, The robot takes out the batteries to sort the finished product and the non-good product on the receiving tray (the direction of the ear is to distinguish the good and non-good).
Name |
CNZDP--200 |
CNZDP--250 |
CNZDP--350 |
CNZDP--450 |
Pole piece size length |
(100~200)mm |
(150~ 250) mm |
(250~350) mm |
(350~450) mm |
Pole piece size width |
(60~150)mm |
(80~200)mm |
(150~250)mm |
(150~300)mm |
Thickness of batteries |
( 5 ~ 60 )mm |
( 5 ~ 60 ) mm |
( 5 ~ 60 )mm |
( 5 ~ 60 )mm |
Lamination speed |
(1.2~1.6second)/sheet |
(1.5~1.8second)/sheet |
(1.8~2.2second)/sheet |
(2.2~2.8second)/sheet |
Finishing time |
≤12second/Times |
≤13second/Times |
≤15second/Times |
≤18second/Times |
Diaphragm alignment accuracy end face |
± 0.3mm |
±0.3mm |
± 0.3mm |
±0.3mm |
Positive alignment accuracy |
±0.3mm |
± 0.3mm |
±0.3mm |
±0.3mm |
Key plate alignment accuracy |
±0.3mm |
± 0.3mm |
±0.3mm |
±0.3mm |
Pole piece diaphragm alignment accuracy |
± 0.3mm |
±0.3mm |
± 0.3mm |
±0.3Mmm |
equipment power |
3 KW |
3 KW |
4, SPAN ,> KW
|
4 KW |
Pass rate (Only caused by the machine bad) |
≥98.0% |
≥98.0% |
≥98.0% |
≥98.0% |
|